Zebra Technologies 79695L-002 Control Panel Buttons, Table 1 • Control Panel Buttons

20Introduction Control Panel

Control Panel Buttons

	Table 1 • Control Panel Buttons
Button	Function
FEED	Forces the printer to feed one blank label each time the button is pressed.
	• Printer not printing: one blank label immediately feeds.
	• Printing: one blank label feeds after the current batch of labels is complete.
PAUSE	Starts and stops the printing process.
	• Printer not printing: no printing occurs. (Press PAUSE again to resume printing.)
	• Printing: printing stops after the current label is complete.
CANCEL	Cancels print jobs when the printer is paused.
	• Printer not printing: the next stored label format does not print.
	• Printing: current label completes printing, and the next label format is cancelled.
	Press and hold for several seconds to cancel all print jobs in memory.
SETUP/EXIT	Enters and exits the configuration mode.
SELECT	Toggles the function of PLUS (+) and MINUS (–)between the Scroll and Change
	Modes.
	• Press once to use PLUS (+) and MINUS (–)to change the values of the selection.
	• Press again to use PLUS (+) and MINUS (–)to scroll through the menu items.
PLUS (+)	Scrolls to the next selection.
(scroll mode)
PLUS (+)	• Increases the value.
(change mode)	• Performs the action on the bottom right of the LCD.
MINUS (–)	Scrolls to the previous selection.
(scroll mode)
MINUS (–)	• Decreases the value.
(change mode)	• Moves to the next available digit in a number.
	• Performs the action on the bottom left of the LCD.

79695L-002 Rev. A Z Series®/RZ™ Series User Guide 6/6/08