Configuration 93

Standard Control Panel Parameters

Table 12 • Printer Parameters (Page 25 of 26)

Language/Parameter Action/Explanation

Select Idle Display

This parameter selects the LCD options for the real-time clock.

Note • If the default value is not selected, pressing PLUS (+) or

MINUS (-)briefly displays the firmware version of the printer.

Default Value: FIRMWARE (FW) VERSION

Selections: MM/DD/YY (24HR), MM/DD/YY (12HR), DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Set Real-Time Clock (RTC) Date

This parameter allows you to set the date following the convention selected in IDLE DISPLAY.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press MINUS (-)to move to the next digit position.

3.Press PLUS (+) to change the value of the digit.

4.Press SELECT to accept any changes and deselect the parameter.

Set RTC Time

This parameter allows you to set the time following the convention selected in IDLE DISPLAY.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press the left oval MINUS (-)to move to the next digit position.

3.Press the right oval PLUS (+) to change the value of the digit.

4.Press SELECT to accept any changes and deselect the parameter.

Specify Password Level

This parameter allows you to select whether certain factory-selected menu items or all menu items are password protected.

Default Value: SELECTED ITEMS

Selections: SELECTED ITEMS, ALL ITEMS

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to toggle between the options.

3.Press SELECT to accept any changes and deselect the parameter.

6/6/08

Z Series®/RZ™ Series User Guide

79695L-002 Rev. A