84Configuration

Standard Control Panel Parameters

Table 12 • Printer Parameters (Page 16 of 26)

 

Language/Parameter

Action/Explanation

 

 

 

 

 

Set Parallel Communications

 

 

 

 

Select the communications port that matches the one being used by the host

 

 

computer.

 

 

Default Value: BIDIRECTIONAL

 

 

Selections: BIDIRECTIONAL, UNIDIRECTIONAL

 

 

To change the value shown:

 

 

 

 

1. Press SELECT to select the parameter.

 

 

2. Press PLUS (+) or MINUS (-)to scroll through the options.

 

 

3. Press SELECT to accept any changes and deselect the parameter.

 

 

 

ZPL only

Set Serial Communications

 

 

Select the communications port that matches the one being used by the host

 

 

 

 

computer. This setting applies only when the serial port is used.

 

 

Note • Select RS232 if you are using an external adapter to enable

 

 

RS422/485 operation.

 

 

Default Value: RS232

 

 

 

 

Selections: RS232, RS485 MULTIDROP

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Set Baud

This setting applies only when the serial port is used. The baud setting of the printer must match the baud setting of the host computer for accurate communications to take place. Select the value that matches the one being used by the host computer.

Default Value: 9600

Selections (ZPL, APL-I,APL-D):300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200

Selections (EPL): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

79695L-002 Rev. A

Z Series®/RZ™ Series User Guide

6/6/08