Zebra Technologies 79695L-002 FEED, FEED, FEED, Feed, Press, Press, Press, Press, Press, Press, Length, Length, Short Cal, No Motion, Short Cal, No Motion, CALIBRATION, Calibration

Configuration 89

Standard Control Panel Parameters

Table 12 • Printer Parameters (Page 21 of 26)

Language/Parameter Action/Explanation

Select Media Power-Up OptionThis parameter sets the action of the media when you turn on the printer.Default Value (non-RFID printers): CALIBRATIONDefault Value (RFID printers): FEEDSelections: CALIBRATION, SHORT CAL, LENGTH, NO MOTION,

FEED

•Calibration adjusts sensor levels and thresholds, determines length, and feeds the media to the next web.

•Short Cal sets media and web thresholds without adjusting sensor gain, determines length, and feeds the media to the next web.

•Length determines label length using current sensor values, and feeds the media to the next web.

•No Motion tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.

•Feed—feeds the labels to the first registration point.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

Select Head Close OptionThis parameter sets the action of the media when you close the printhead.

Default Value (non-RFID printers): CALIBRATION

Default Value (RFID printers): FEED

Selections: CALIBRATION, SHORT CAL, LENGTH, NO MOTION,

FEED

•Calibration adjusts sensor levels and thresholds, determines length, and feeds the media to the next web.

•Short Cal sets media and web thresholds without adjusting sensor gain, determines length, and feeds the media to the next web.

•Length determines label length using current sensor values, and feeds the media to the next web.

•No Motion tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.

•Feed—feeds the labels to the first registration point.

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

6/6/08 Z Series®/RZ™ Series User Guide 79695L-002 Rev. A