112Routine Maintenance

Routine Maintenance for the Rewind Option

Adjust Media Alignment for Rewind Option

The instructions below apply only if the printer has a Rewind option. The liner should be installed flush against the backplate of the rewind spindle to prevent the media/backing from winding too loosely.

Perform the adjustments in the order given. Do only what is needed to solve the problem.

To adjust the media alignment for printers with the Rewind option, complete these steps:

1.Turn the adjustment dial (1) clockwise to move the media toward the backplate (2).

2

1

2.Turn the adjustment dial (1) counter clockwise to move the media away from the backplate (2).

2

1

79695L-002 Rev. A

Z Series®/RZ™ Series User Guide

6/6/08