Zebra Technologies RXI4TM manual Printer Parameters Sheet 14 of, Set Control Prefix Character

104

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 14 of 22)

Language/Parameter Action/Explanation

Set Control Prefix Character

The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II control instruction.

Note • Do not use the same hex value for the control, format, and delimiter character. The printer must see different characters to work properly.

Default Value: 7E ~

Range: 00 to FF

To change the value shown:

1.Press MINUS (-)to move to the next digit position.

2.Press PLUS (+) to increase the value of the digit.

Set Format Prefix Character

The format prefix is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start of a ZPL/ZPL II format instruction. See the Programming Guide for ZPL, ZBI, Set-Get-Do, Mirror, and WML for more information.

Note • Do not use the same hex value for the control, format, and delimiter character. The printer must see different characters to work properly.

Default Value: 5E ^

Range: 00 to FF

To change the value shown:

1.Press MINUS (-)to move to the next digit position.

2.Press PLUS (+) to increase the value of the digit.

Set Delimiter Character

The delimiter character is a two-digit hex value used as a parameter place marker in ZPL/ZPL II format instructions. See the Programming Guide for ZPL, ZBI, Set-Get-Do, Mirror, and WML for more information.

Note • Do not use the same hex value for the control, format, and delimiter character. The printer must see different characters to work properly.

Default Value: 2C ,

Range: 00 to FF

To change the value shown:

1.Press MINUS (-)to move to the next digit position.

2.Press PLUS (+) to increase the value of the digit.

P1009874-002 Xi4™/RXi4™ User Guide 1/7/10