Zebra Technologies 11280100200 manual To set up the printer in Peel-Off mode, complete these steps

Operations

Load Media in Peel-Off Mode

49

Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging necklaces, identification badges, or other metallic objects that could touch the printhead. You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.

To set up the printer in Peel-Off mode, complete these steps:

1.Remove the rewind plate (if installed) from the front of the printer. Store it on the two mounting screws on the inside of the printer base.

2.Set the printer to Peel-Off mode. See Select Print Mode on page 92 for instructions.

3.Insert media into the printer. See Prepare the Media for Loading on page 39 for instructions.

1/7/10 Xi4™/RXi4™ User Guide P1009874-002