Zebra Technologies 11680100201, XI4TM INITIALIZE FLASH prompt, Initializing Completed, List All

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 9 of 22)

Language/Parameter Action/Explanation

List Network Settings

This option prints a network configuration label (see Figure 13

on page 90), which lists the settings for any print server that is installed.

To print a network configuration label:

1.Press PLUS (+) to select PRINT.

List All

This option prints labels that list the available fonts, bar codes, images, formats, and the current printer and network configurations.

To print labels for all settings:

1.Press PLUS (+) to select PRINT.

Initialize Flash Memory

This option erases all previously stored information from Flash memory.

Caution • This option completely erases the Flash memory.

To initialize Flash memory:

1.If prompted for a password, enter the printer password. For instructions, see Change Password-Protected Parameters on page 88.

The display shows INITIALIZE FLASH?

2.Press PLUS (+) to select YES.

The display shows ARE YOU SURE?.

3.Do you want to continue?

•Press MINUS (-)to select NO to cancel the request and return to the

INITIALIZE FLASH prompt.

•Press PLUS (+) to select YES and begin initialization. When initialization is complete, the control panel displays

INITIALIZING COMPLETED.

Note • Depending on the amount of free FLASH memory, initialization may take up to 1 minute to complete.

99

1/7/10 Xi4™/RXi4™ User Guide P1009874-002