Zebra Technologies 17280100000, 14080100200, RXI4TM, 17080100200, 22080100000 manual Types of Media

Printer Setup

Types of Media

Types of Media

Important • Zebra strongly recommends the use of Zebra-brand supplies for continuous high-quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been specifically engineered to enhance the printing capabilities of the printer and to prevent premature printhead wear. To purchase supplies, go to http://www.zebra.com/howtobuy.

Your printer can use various types of media:

•Standard media—Most standard media uses an adhesive backing that sticks individual labels or a continuous length of labels to a liner.

•Tag stock—Tags are usually made from a heavy paper. Tag stock does not have adhesive or a liner, and it is typically perforated between tags.

•Radio frequency identification (RFID) “smart” media—RFID

media can be used in a printer that is equipped with an RFID reader/encoder. RFID labels are made from the same materials and adhesives as non-RFID labels. Each label has an RFID transponder

(sometimes called an “inlay”), made of a chip and an antenna,

embedded between the label and the liner. The shape of the transponder varies by manufacturer and is visible through the label. All “smart” labels have memory that can be read, and many have memory that can be encoded.

Table 4 describes roll and fanfold media. Roll media is loaded into the printer while fanfold media may be located inside or outside of the printer.

31

1/7/10 Xi4™/RXi4™ User Guide P1009874-002