Zebra Technologies 11680100001, XI4TM manual Printer Parameters Sheet 21 of, Select Format Convert

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 21 of 22)

Language/Parameter Action/Explanation

Select Format Convert

Selects the bitmap scaling factor. The first number is the original dots per inch (dpi) value; the second, the dpi to which you would like to scale.

Default Value: NONE

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

Select Idle Display

This parameter selects the LCD options for the real-time clock.

Note • If the default value is not selected, pressing PLUS (+) or

MINUS (-)briefly displays the firmware version of the printer.

Default Value: FIRMWARE (FW) VERSION

Selections: MM/DD/YY (24HR), MM/DD/YY (12HR),

DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

Set Real-Time Clock (RTC) Date

This parameter allows you to set the date following the convention selected in IDLE DISPLAY.

To change the value shown:

1.Press MINUS (-)to move to the next digit position.

2.Press PLUS (+) to change the value of the digit.

Set RTC Time

This parameter allows you to set the time following the convention selected in IDLE DISPLAY.

To change the value shown:

1.Press MINUS (-)to move to the next digit position.

2.Press PLUS (+) to change the value of the digit.

Specify Password Level

This parameter allows you to select whether certain factory-selected menu items or all menu items are password protected.

Default Value: SELECTED ITEMS

Selections: SELECTED ITEMS, ALL ITEMS

1.Press PLUS (+) or MINUS (-)to toggle between the options.

111

1/7/10 Xi4™/RXi4™ User Guide P1009874-002