Zebra Technologies 14080100000 Exit Setup Mode, To leave Setup mode, complete these steps, Cancel

Configuration

Setup Mode

Exit Setup Mode

When you exit setup mode, you have several options for saving, changing, or not changing parameters.

To leave Setup mode, complete these steps:

1.While in Setup mode, press SETUP/EXIT. The LCD displays SAVE CHANGES.

2.Press PLUS (+) or MINUS (-)to display the save options:

LCD	Description
PERMANENT	Stores values in the printer even when power is turned off.
TEMPORARY	Saves the changes until power is turned off.
CANCEL	Cancels all changes made since you entered Setup mode,
	except for changes made to the darkness and tear-off settings,
	which go into effect as soon as they are made.
LOAD DEFAULTS	Restores all parameters other than the network settings back to
	the factory defaults. Use care when loading defaults because
	you will need to reload all settings that you changed manually.
	Note • On non-RFID printers, loading factory defaults
	causes the printer to auto-calibrate.
LOAD LAST SAVE	Loads values from the last permanent save.
DEFAULT NET	Restores the wired and wireless network settings back to
	factory defaults.

3.Press NEXT/SAVE to select the displayed choice.

When the configuration and calibration sequence is done, PRINTER READY displays.

87

1/7/10 Xi4™/RXi4™ User Guide P1009874-002