94

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 4 of 22)

Language/Parameter

Action/Explanation

Set Print Width

This parameter specifies the printable area across the width of the label. Table 9 shows the ranges and default values for print width, which are based on the printer model and the printhead resolution.

Table 9 • Print Width Ranges and Maximum Values

Printhead

 

Printer

 

 

 

Resolution

110Xi4/R110Xi4

 

140Xi4, 170Xi4, 220Xi4

 

 

 

 

 

 

200 dpi

Default Value: 832

 

Default Value: 1344

 

Range: 2 to 832 dots

 

Range: 2 to 1344 dots

 

 

 

 

300 dpi

Default Value: 1248

 

Default Value: 1984

 

Range: 2 to 1248 dots

 

Range: 2 to 1984 dots

 

 

 

 

600 dpi

Default Value: 2496

 

N/A

 

Range: 2 to 2496 dots

 

 

 

 

 

 

Note • Setting the width too narrow can result in portions of a label format not being printed on the media. Setting the width too wide wastes formatting memory and can cause printing off of the label and on the platen roller. This setting can affect the horizontal position of the label format if the image was inverted using the ^POI ZPL II command.

To change the value shown:

1.Press PLUS (+) or MINUS (-)to change the value shown.

P1009874-002

Xi4™/RXi4™ User Guide

1/7/10

Page 94
Image 94
Zebra Technologies 17080100200, XI4TM Printer Parameters Sheet 4, Set Print Width, Print Width Ranges and Maximum Values