Zebra Technologies 22380100000, XI4TM Printer Parameters Sheet 12 of, Set Serial Communications

102

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 12 of 22)

Language/Parameter Action/Explanation

Set Serial Communications

Select the communications port that matches the one being used by the host computer. This setting applies only when the serial port is used.

Note • Select RS232 if you are using an external adapter to enable RS422/485 operation.

Default Value: RS232

Selections: RS232, RS422/485, RS485 MULTIDROP

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

Set Baud

This setting applies only when the serial port is used. The baud setting of the printer must match the baud setting of the host computer for accurate communications to take place. Select the value that matches the one being used by the host computer.

Default Value: 9600

Selections: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

Set Data Bits

This setting applies only when the serial port is used. The data bits of the printer must match the data bits of the host computer for accurate communications to take place. Set the data bits to match the setting being used by the host computer.

Default Value: 8 BITS

Selections: 7 BITS, 8 BITS

To change the value shown:

1.Press PLUS (+) or MINUS (-)to toggle between the options.

Set Parity

This setting applies only when the serial port is used. The parity of the printer must match the parity of the host computer for accurate communications to take place. Select the parity that matches the one being used by the host computer.

Default Value: NONE

Selections: EVEN, ODD, NONE

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

P1009874-002 Xi4™/RXi4™ User Guide 1/7/10