Zebra Technologies 11280100000, 14080100200, RXI4TM, 17080100200, 22080100000 manual Operations

64

Operations

Load Media in Rewind Mode

13.Extend approximately 36 in. (920 mm) of media out of the printer. Remove and discard the labels from this exposed media.

14.Remove the hook from the rewind spindle.

15.If you are using a core, slide it onto the rewind spindle until it is flush against the guide plate.

Note • A core is not required.

16.Wind the media liner counterclockwise around the rewind spindle.

17.Reinstall the hook. Insert the short end of the hook into the hole in the center of the adjusting nut (1). Insert the long end of the hook into the small hole on the guide plate (2).

P1009874-002 Xi4™/RXi4™ User Guide 1/7/10