Zebra Technologies 14080100200, RXI4TM manual 105, Printer Parameters Sheet 15, Select ZPL Mode

Configuration

Standard Control Panel Parameters

Table 8 • Printer Parameters (Sheet 15 of 22)

Language/Parameter Action/Explanation

Select ZPL Mode

The printer remains in the selected mode until it is changed by this parameter or by using a ZPL/ZPL II command. The printer accepts label formats written in either ZPL or ZPL II, eliminating the need to rewrite any ZPL formats that already exist. See the Programming Guide for ZPL, ZBI, Set-Get-Do, Mirror, and WML for more information on the differences between ZPL and ZPL II.

Default Value: ZPL II

Range: ZPL II, ZPL

To change the value shown:

1.Press PLUS (+) or MINUS (-)to toggle between the options.

Select Media Power-Up Option

This parameter sets the action of the media when you turn on the printer.

Default Value (non-RFID printers): CALIBRATION

Default Value (RFID printers): FEED

Selections: CALIBRATION, LENGTH, SHORT CAL, NO MOTION,

FEED

•Calibration adjusts sensor levels and thresholds, determines length, and feeds the media to the next web.

•Short Cal sets media and web thresholds without adjusting sensor gain, determines length, and feeds the media to the next web.

•Length determines label length using current sensor values, and feeds the media to the next web.

•No Motion tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.

•Feed—feeds the labels to the first registration point.

To change the value shown:

1.Press PLUS (+) or MINUS (-)to scroll through the options.

105

1/7/10 Xi4™/RXi4™ User Guide P1009874-002