ZyAIR G-2000 Plus User’s Guide

Figure 61 Trigger Port

The following table describes the labels in this screen.

Table 47

Trigger Port

 

 

 

LABEL

 

DESCRIPTION

 

 

 

#

 

This is the rule index number (read-only).

 

 

 

Name

 

Type a unique name (up to 15 characters) for identification purposes. All characters

 

 

are permitted - including spaces.

Incoming

 

Incoming is a port (or a range of ports) that a server on the WAN uses when it sends

 

 

out a particular service. The ZyAIR forwards the traffic with this port (or range of ports)

 

 

to the client computer on the LAN that requested the service.

Start Port

 

Type a port number or the starting port number in a range of port numbers.

 

 

 

End Port

 

Type a port number or the ending port number in a range of port numbers.

 

 

 

Trigger

 

The trigger port is a port (or a range of ports) that causes (or triggers) the ZyAIR to

 

 

record the IP address of the LAN computer that sent the traffic to a server on the WAN.

Start Port

 

Type a port number or the starting port number in a range of port numbers.

 

 

 

End Port

 

Type a port number or the ending port number in a range of port numbers.

 

 

 

Apply

 

Click Apply to save your changes back to the ZyAIR.

 

 

 

Reset

 

Click Reset to begin configuring this screen afresh.

 

 

 

Chapter 10 Single User Account (SUA) / Network Address Translation (NAT)

150