ZyAIR G-2000 Plus User’s Guide

Table 85 Menu 1.1 Configure Dynamic DNS

FIELD

DESCRIPTION

 

 

Enable

Your ZyAIR supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER] to

Wildcards

select Yes or No This field is N/A when you choose DDNS client as your service

 

provider.

Offline

This field is only available when CustomDNS is selected in the DDNS Type field.

 

Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected, http:/

 

/www.dyndns.org/ traffic is redirected to a URL that you have previously specified

 

(see www.dyndns.org for details).

Edit Update IP Address:

You can select Yes in either the Use Server Detected IP field (recommended) or the User Specified IP Addr field, but not both.

With the Use Server Detected IP and User Specified IP Addr fields both set to No, the DDNS server automatically updates the IP address of the host name(s) with the ZyAIR’s WAN IP address.

DDNS does not work with a private IP address. When both fields are set to No, the ZyAIR must have a public WAN IP address in order for DDNS to work.

Use Server

Press [SPACE BAR] to select Yes and then press [ENTER] to have the DDNS

Detected IP

server automatically update the IP address of the host name(s) with the public IP

 

address that the ZyAIR uses or is behind.

 

You can set this field to Yes whether the IP address is public or private, static or

 

dynamic.

User Specified IP

Press [SPACE BAR] to select Yes and then press [ENTER] to update the IP

Address

address of the host name(s) to the IP address specified below.

 

Only select Yes if the ZyAIR uses or is behind a static public IP address.

 

 

IP Address

Enter the static public IP address if you select Yes in the User Specified IP Addr

 

field.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Note: The IP address updates when you reconfigure menu 1 or perform DHCP client renewal

261

Chapter 21 General Setup