ZyAIR G-2000 Plus User’s Guide

CH A P T E R 28

Network Address Translation (NAT)

This chapter discusses how to configure NAT on the ZyAIR.

28.1 Using NAT

Note: You must create a firewall rule in addition to setting up SUA/NAT, to allow traffic from the WAN to be forwarded through the ZyAIR

28.1.1 SUA (Single User Account) Versus NAT

SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that supports two types of mapping, Many-to-Oneand Server. See section Address Mapping Sets for a detailed description of the NAT set for SUA. The ZyAIR also supports Full Feature NAT to map multiple global IP addresses to multiple private LAN IP addresses of clients or servers using mapping types.

Note: Choose SUA Only if you have just one public WAN IP address for your ZyAIR.

Note: Choose Full Feature if you have multiple public WAN IP addresses for your ZyAIR.

28.2 Applying NAT

You apply NAT via menus 4 or 11.3 as displayed next. The next figure shows you how to apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 - Internet Access Setup.

Chapter 28 Network Address Translation (NAT)

294