ZyAIR G-2000 Plus User’s Guide

 

Table 95 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

 

Route

This field refers to the protocol that will be routed by your ZyAIR – IP is the only

 

 

 

option for the ZyAIR.

 

 

ISP

Use [SPACE BAR] to select Yes to use your ISP.

 

 

 

 

 

 

Apply Alias

The ZyAIR supports three logical LAN interfaces via its single physical Ethernet

 

 

 

interface with the ZyAIR itself as the gateway for each LAN network. Press

 

 

 

[SPACE BAR] to select IP Alias 1or 2 and then press [ENTER].

 

 

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press

 

 

 

[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options.

 

 

Session Options

 

 

 

 

 

 

 

Edit Filter Sets

This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and

 

 

 

press [ENTER] to open menu 11.5 to edit the filter sets. See the Remote Node

 

 

 

Filter section for more details.

 

 

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to

 

 

save your configuration, or press [ESC] at any time to cancel.

 

25.2.2 PPPoE Encapsulation

The ZyAIR supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use PPPoE encapsulation when you’re using the ZyAIR with a DSL modem as the WAN device. If you change the Encapsulation to PPPoE, then you will see the next screen. Please see the appendix for more information on PPPoE.

Chapter 25 Remote Node Configuration

282