ZyAIR G-2000 Plus User’s Guide

Figure 199 FTP Session Example

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.

ftp> quit

34.2.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in third party FTP clients.

Table 120 General Commands for Third Party FTP Clients

COMMAND

DESCRIPTION

 

 

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the server for

 

anonymous access. Anonymous logins will work only if your ISP or service

 

administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

 

Initial Remote

Specify the default remote directory (path).

Directory

 

Initial Local Directory

Specify the default local directory (path).

 

 

34.2.4 TFTP and FTP over WAN Management Limitations

TFTP, FTP and Telnet over WAN will not work when:

1You have disabled Telnet service in menu 24.11.

2You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service.

3The IP address in the Secured Client IP field in menu 24.11 does not match the client IP. If it does not match, the ZyAIR will disconnect the Telnet session immediately.

4You have an SMT console session running.

353

Chapter 34 Firmware and Configuration File Maintenance