ZyAIR G-2000 Plus User’s Guide

CH A P T E R 35

System Maintenance and

Information

This chapter leads you through SMT menus 24.8 and 24.10.

35.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 – System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

Chapter 35 System Maintenance and Information

362