ZyAIR
Figure 9 Wizard 4: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 7 Wizard 4: Ethernet Encapsulation
LABEL | DESCRIPTION |
|
|
ISP Parameters for Internet Access | |
|
|
Encapsulation | You must choose the Ethernet option when the WAN port is used as a regular |
| Ethernet. Otherwise, choose PPP over Ethernet or PPTP for a |
Service Type | Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR- |
| Manager (Roadrunner Manager authentication method), |
| (Roadrunner Toshiba authentication method) or Telia Login. |
| The following fields are not applicable (N/A) for the Standard service type. |
|
|
User Name | Type the user name given to you by your ISP. |
|
|
Password | Type the password associated with the user name above. |
|
|
Login Server IP | Type the authentication server IP address here if your ISP gave you one. |
Address |
|
Login Server | This field only applies when you select Telia Login in the Service Type field. Type |
| the domain name of the Telia login server, for example “login1.telia.com”. |
Relogin Every | This field only applies when you select Telia Login in the Service Type field. The |
(min) | Telia server logs the ZyAIR out if the ZyAIR does not log in periodically. Type the |
| number of minutes from 1 to 59 (30 default) for the ZyAIR to wait between logins. |
Back | Click Back to return to the previous screen. |
|
|
Next | Click Next to continue. |
|
|
Chapter 3 Wizard Setup | 54 |