ZyAIR
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
Table 110 Menu 22 SNMP Configuration
FIELD | DESCRIPTION |
|
|
SNMP: |
|
|
|
Get Community | Type the Get Community, which is the password for the incoming Get- and |
| GetNext requests from the management station. |
Set Community | Type the Set Community, which is the password for incoming Set requests from |
| the management station. |
Trusted Host | If you enter a trusted host, your ZyAIR will only respond to SNMP messages from |
| this address. A blank (default) field means your ZyAIR will respond to all SNMP |
| messages it receives, regardless of source. |
Trap: |
|
|
|
Community | Type the trap community, which is the password sent with each trap to the SNMP |
| manager. |
Destination | Type the IP address of the station to send your SNMP traps to. |
|
|
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
31.4 SNMP Traps
The ZyAIR will send traps to the SNMP manager when any one of the following events occurs:
Table 111 | SNMP Traps |
| |
|
|
|
|
TRAP # |
| TRAP NAME | DESCRIPTION |
|
|
|
|
1 |
| coldStart (defined in | A trap is sent after booting (power on). |
|
|
|
|
2 |
| warmStart (defined in | A trap is sent after booting (software reboot). |
|
|
|
|
3 |
| linkUp (defined in | A trap is sent when the port is up. |
|
|
|
|
Chapter 31 SNMP Configuration | 330 |