ZyAIR G-2000 Plus User’s Guide

Figure 212 Menu 24.11 – Remote Management Control

 

Menu 24.11 - Remote Management Control

TELNET Server:

Port = 23

Access = LAN only

 

Secure Client IP =

0.0.0.0

FTP Server:

Port = 21

Access = LAN only

 

Secure Client IP =

0.0.0.0

Web Server:

Port = 80

Access = LAN only

 

Secure Client IP =

0.0.0.0

SNMP Service:

Port = 161

Access = LAN only

 

Secure Client IP =

0.0.0.0

DNS Service:

Port = 53

Access = LAN only

 

Secure Client IP =

0.0.0.0

 

Press ENTER to Confirm

or ESC to Cancel:

The following table describes the fields in this screen.

Table 125 Menu 24.11 – Remote Management Control

FIELD

DESCRIPTION

 

 

Telnet Server

Each of these read-only labels denotes a service or protocol.

FTP Server

 

Web Server

 

SNMP Service

 

DNS Service

 

 

 

Port

This field shows the port number for the service or protocol. You may change the

 

port number if needed, but you must use the same port number to access the

 

ZyAIR.

Access

Select the access interface (if any) by pressing [SPACE BAR], then [ENTER] to

 

choose from: LAN only, WAN only, ALL or Disable.

Secure Client IP

The default 0.0.0.0 allows any client to use this service or protocol to access the

 

ZyAIR. Enter an IP address to restrict access to a client with a matching IP address.

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.

36.1.1 Telnet

You can configure your ZyAIR for remote Telnet access as shown next.

369

Chapter 36 Remote Management