ZyAIR
Figure 138 Menu 11.1 Remote Node Profile for PPTP Encapsulation
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe | Route= IP | ||
Active= | Yes | ISP= No | |
Encapsulation= PPTP | Apply Alias= None | ||
Edit IP= No | |||
Service | Type= Standard | Telco Option: | |
Service | Name= N/A | Allocated Budget(min)= 0 | |
Outgoing: | Period(hr)= 0 | ||
My | Login= | Schedules= | |
My | Password= ******** | ||
Retype to Confirm= ******** |
| ||
Authen= CHAP/PAP | Session Options: | ||
PPTP | My | IP: Static | |
My | IP | Addr= | Edit Filter Sets= No |
My | IP | Mask= | Idle Timeout(sec)= 100 |
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
The next table shows how to configure fields in menu 11.1 not previously discussed.
Table 97 Menu 11.1 Remote Node Profile for PPTP Encapsulation
FIELD | DESCRIPTION |
|
|
Encapsulation | Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu |
| 11.3 to check the IP Address setting once you have selected the encapsulation |
| method. |
My IP Addr | Enter the IP address of the WAN Ethernet port. |
|
|
My IP Mask | Enter the subnet mask of the WAN Ethernet port. |
|
|
Server IP Addr | Enter the IP address of the ANT modem. |
|
|
Connection ID/ | Enter the connection ID or connection name in the ANT. It must follow the “c:id” and |
Name | “n:name” format. |
| This field is optional and depends on the requirements of your DSL modem. |
|
|
25.3 Edit IP
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
285 | Chapter 25 Remote Node Configuration |