ZyAIR G-2000 Plus User’s Guide

Table 116 Menu 24.2.1 System Maintenance : Information

FIELD

DESCRIPTION

 

 

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware

 

version. ZyNOS is a registered trademark of ZyXEL Communications

 

Corporation.

Country Code

Refers to the country code of the firmware.

 

 

LAN

 

 

 

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your ZyAIR.

 

 

IP Address

This is the IP address of the ZyAIR in dotted decimal notation.

 

 

IP Mask

This shows the subnet mask of the ZyAIR.

 

 

DHCP

This field shows the DHCP setting of the ZyAIR.

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

33.2.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance – Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.

Figure 193 Menu 24.2.2 System Maintenance : Change Console Port Speed

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel:

After you changed the console port speed on your ZyAIR, you must also make the same change to the console port speed parameter of your communication software.

33.3 Log and Trace

Your ZyAIR provides the error logs and trace records that are stored locally.

33.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow the procedures to view the local error/trace log:

1Type 24 in the main menu to display Menu 24 – System Maintenance.

2From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.

341

Chapter 33 System Information and Diagnosis