ZyXEL Communications G-2000 Plus Log Commands, Table, Table 150 Sys log

ZyAIR G-2000 Plus User’s Guide

Table 149 ICMP Notes (continued)

TYPE	CODE	DESCRIPTION
	4	A packet that needed fragmentation was dropped because it was set to Don't Fragment
		(DF)
	5	Source route failed
4		Source Quench
	0	A gateway may discard internet datagrams if it does not have the buffer space needed
		to queue the datagrams for output to the next network on the route to the destination
		network.
5		Redirect
	0	Redirect datagrams for the Network
	1	Redirect datagrams for the Host
	2	Redirect datagrams for the Type of Service and Network
	3	Redirect datagrams for the Type of Service and Host
8		Echo
	0	Echo message
11		Time Exceeded
	0	Time to live exceeded in transit
	1	Fragment reassembly time exceeded
12		Parameter Problem
	0	Pointer indicates the error
13		Timestamp
	0	Timestamp request message
14		Timestamp Reply
	0	Timestamp reply message
15		Information Request
	0	Information request message
16		Information Reply
	0	Information reply message

Table 150 Sys log

LOG MESSAGE	DESCRIPTION
Mon dd hr:mm:ss hostname	This message is sent by the "RAS" when this syslog is generated. The
src="<srcIP:srcPort>"	messages and notes are defined in this appendix’s other charts.
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and use the commands).

407 Appendix G