ZyAIR G-2000 Plus User’s Guide

Figure 179 Filtering LAN Traffic

Menu 3.1 - LAN Port Filter Setup

Input Filter Sets: protocol filters= device filters=

Output Filter Sets: protocol filters= device filters=

Press ENTER to Confirm or ESC to Cancel:

29.6.2 Applying Remote Node Filters

Go to menu 11.5 (shown below – note that call filter sets are only present for PPPoE encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up to four filter sets by entering their numbers separated by commas. The ZyAIR already has filters to prevent NetBIOS traffic from triggering calls, and block incoming telnet, FTP and HTTP connections.

Figure 180 Filtering Remote Node Traffic

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= device filters=

Output Filter Sets: protocol filters= device filters=

Enter here to CONFIRM or ESC to CANCEL:

325

Chapter 29 Filter Configuration