ZyAIR G-2000 Plus User’s Guide

19.2.1 System Statistics

Read-only information here includes port status, packet specific statistics and bridge link status. Also provided are "system up time" and "poll interval(s)". The Poll Interval field is configurable.

Figure 102 System Status: Show Statistics

The following table describes the labels in this screen.

Table 77 System Status: Show Statistics

LABEL

DESCRIPTION

 

 

Port

This is the WAN, LAN or WLAN port.

 

 

Status

This shows the port speed and duplex setting if you are using Ethernet

 

encapsulation for the Ethernet port.

 

This shows the transmission speed only for wireless port.

 

 

TxPkts

This is the number of transmitted packets on this port.

 

 

RxPkts

This is the number of received packets on this port.

 

 

Collisions

This is the number of collisions on this port.

 

 

Tx B/s

This shows the transmission speed in bytes per second on this port.

 

 

Rx B/s

This shows the reception speed in bytes per second on this port.

 

 

Up Time

This is total amount of time the line has been up.

 

 

System Up Time

This is the total time the ZyAIR has been on.

 

 

Poll Interval(s)

Enter the time interval for refreshing statistics.

 

 

Set Interval

Click this button to apply the new poll interval you entered above.

 

 

Stop

Click this button to stop refreshing statistics.

 

 

19.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyAIR as a DHCP server or disable it. When configured as a server, the ZyAIR provides the TCP/IP configuration for the clients. If set to None, DHCP service will be disabled and you must have another DHCP server on your LAN, or else the computer must be manually configured.

Chapter 19 Maintenance

242