ZyAIR
Table 17 LAN IP
LABEL | DESCRIPTION |
|
|
Allow between LAN | Select this check box to forward NetBIOS packets from the LAN to the WAN and |
and WAN | from the WAN to the LAN. If your firewall is enabled with the default policy set to |
| block WAN to LAN traffic, you also need to enable the default WAN to LAN |
| firewall rule that forwards NetBIOS traffic. |
| Clear this check box to block all NetBIOS packets going from the LAN to the |
| WAN and from the WAN to the LAN. |
Apply | Click Apply to save your changes back to the ZyAIR. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
5.5 Configuring Static DHCP
This table allows you to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
To change your ZyAIR’s Static DHCP settings, click LAN, then the Static DHCP tab. The screen appears as shown.
75 | Chapter 5 LAN Screens |