ZyAIR G-2000 Plus User’s Guide

Figure 63 Static Route

The following table describes the labels in this screen.

Table 48

Static Route

 

 

 

LABEL

 

DESCRIPTION

 

 

 

#

 

Number of an individual static route.

 

 

 

Name

 

Name that describes or identifies this route.

 

 

 

Active

 

This field shows whether this static route is active (Yes) or not (No).

 

 

 

Destination

 

This parameter specifies the IP network address of the final destination. Routing is

 

 

always based on network number.

Gateway

 

This is the IP address of the gateway. The gateway is an immediate neighbor of

 

 

your ZyAIR that will forward the packet to the destination. On the LAN, the gateway

 

 

must be a router on the same segment as your ZyAIR; over the WAN, the gateway

 

 

must be the IP address of one of the remote nodes.

Edit

 

Select a static route index number and then click Edit to set up a static route on the

 

 

ZyAIR.

Delete

 

To remove a static route on the ZyAIR, click the radio button next to the static route

 

 

index number you want to remove, then click Delete.

11.2.1 Configuring Route Entry

Select a static route index number and click Edit. The screen shown next appears. Fill in the required information for each static route.

153

Chapter 11 Static Route Screens