ZyAIR G-2000 Plus User’s Guide

33.3.2.5 Firewall log

Firewall Log Message Format

SdcmdSyslogSend(SYSLOG_FIREWALL, SYSLOG_NOTICE, buf);

buf = IP[Src=xx.xx.xx.xx : spo=xxxx Dst=xx.xx.xx.xx : dpo=xxxx prot rule action]

Src: Source Address

spo: Source port

(empty means no source port information)

 

 

Dst: Destination

Address

 

 

dpo: Destination

port (empty means no destination port information)

 

 

prot: Protocol (“TCP”,”UDP”,”ICMP”, ”IGMP”, ”GRE”, ”ESP”)

 

 

rule: <a,b> where a means "set" number; b means "rule" number.

 

 

Action: nothing(N) block (B) forward (F)

:137

-

08-01-200011:48:41Local1.Notice192.168.10.10RAS: FW 172.21.1.80

>172.21.1.80

:137

UDPdefault permit:<2,0>B

:520

-

08-01-200011:48:41Local1.Notice192.168.10.10RAS: FW 192.168.77.88

>192.168.77.88

:520

UDPdefault permit:<2,0>B

->172.21.1.50

08-01-200011:48:39Local1.Notice192.168.10.10RAS: FW 172.21.1.50

IGMP<2>default

permit:<2,0>B

->172.21.1.25

08-01-200011:48:39Local1.Notice192.168.10.10RAS: FW 172.21.1.25

IGMP<2>default

permit:<2,0>B

 

 

33.3.3 Call-Triggering Packet

Call-triggering Packet displays information about the packet that triggered a dial-out call in an easy readable format. Equivalent information is available in menu 24.1 in hexadecimal format.

345

Chapter 33 System Information and Diagnosis