ZyAIR G-2000 Plus User’s Guide

2From this menu, type 4. Diagnostic to open Menu 24.4 – System Maintenance – Diagnostic.Menu 24.4 System Maintenance : Diagnostic

Menu 24.4 - System Maintenance - Diagnostic

TCP/IP

1.Ping Host

2.WAN DHCP Release

3.WAN DHCP Renewal

4.Internet Setup Test

System

11. Reboot System

Enter Menu Selection Number:

Host IP Address= N/A

33.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in LAN & WAN DHCP. LAN DHCP has already been discussed. The ZyAIR can act either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.

Figure 197 LAN & WAN DHCP

The following table describes the diagnostic tests available in menu 24.4 for your ZyAIR and associated connections..

Table 118 Menu 24.4 System Maintenance Menu: Diagnostic

FIELD

DESCRIPTION

 

 

Ping Host

Ping the host to see if the links and TCP/IP protocol on both systems are

 

working.

WAN DHCP Release

Release the IP address assigned by the DHCP server.

 

 

347

Chapter 33 System Information and Diagnosis