ZyAIR
Figure 167 Menu 15.3 Trigger Port Setup
Menu 15.3 - Trigger Port Setup |
| Trigger | ||
Rule | Name | Incoming | ||
Start Port | End Port | Start Port End Port | ||
1. | Real Audio | 6970 | 7170 | 7070 | 7070 |
2. |
| 0 | 0 | 0 | 0 |
3. |
| 0 | 0 | 0 | 0 |
4. |
| 0 | 0 | 0 | 0 |
5. |
| 0 | 0 | 0 | 0 |
6. |
| 0 | 0 | 0 | 0 |
7. |
| 0 | 0 | 0 | 0 |
8. |
| 0 | 0 | 0 | 0 |
9. |
| 0 | 0 | 0 | 0 |
10. |
| 0 | 0 | 0 | 0 |
11. |
| 0 | 0 | 0 | 0 |
12. |
| 0 | 0 | 0 | 0 |
| Press ENTER to Confirm or ESC to Cancel: |
| |||
The following table describes the fields in this screen.
Table 105 Menu 15.3 Trigger Port Setup
FIELD | DESCRIPTION |
|
|
Rule | This is the rule index number. |
|
|
Name | Enter a unique name for identification purposes. You may enter up to 15 characters in |
| this field. All characters are permitted - including spaces. |
Incoming | Incoming is a port (or a range of ports) that a server on the WAN uses when it sends |
| out a particular service. The ZyAIR forwards the traffic with this port (or range of ports) |
| to the client computer on the LAN that requested the service. |
Start Port | Enter a port number or the starting port number in a range of port numbers. |
|
|
End Port | Enter a port number or the ending port number in a range of port numbers. |
|
|
Trigger | The trigger port is a port (or a range of ports) that causes (or triggers) the ZyAIR to |
| record the IP address of the LAN computer that sent the traffic to a server on the |
| WAN. |
Start Port | Enter a port number or the starting port number in a range of port numbers. |
|
|
End Port | Enter a port number or the ending port number in a range of port numbers. |
|
|
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.
311 | Chapter 28 Network Address Translation (NAT) |