ZyAIR G-2000 Plus User’s Guide

Figure 130 Menu 3.5 Wireless LAN Setup

Menu 3.5 - Wireless LAN Setup

Enable Wireless LAN= Yes

 

ESSID= Wireless

Edit MAC Address Filter= No

Hide ESSID= No

Channel ID= CH06 2437MHz

Edit Roaming Configuration= No

RTS Threshold= 2432

Breathing LED= Yes

Frag. Threshold= 2432

Preamble= Long

WEP Encryption= 128-bit WEP

802.11 Mode= Mixed

Default Key= 1

 

Key1= ********

 

Key2= ********

 

Key3= ********

 

Key4= ********

 

Authen. Method= Auto

 

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

The following table describes the fields in this menu.

Table 90 Menu 3.5 Wireless LAN Setup

FIELD

DESCRIPTION

 

 

ESSID

The ESSID (Extended Service Set IDentity) identifies the AP to which the

 

wireless stations associate. Wireless stations associating to the AP must have

 

the same ESSID. Enter a descriptive name of up to 32 printable 7-bit ASCII

 

characters.

Hide ESSID

Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing data

 

frame so an intruder cannot obtain the ESSID through passive scanning.

Channel ID

Press [SPACE BAR] to select a channel. This allows you to set the operating

 

frequency/channel depending on your particular region.

RTS Threshold

Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value

 

between 0 and 2432.

Fragment Threshold

This is the maximum data fragment size that can be sent. Enter a value

 

between 256 and 2432.

WEP Encryption

Select Disable to allow wireless stations to communicate with the access points

 

without any data encryption.

 

Select 64-bit WEP or 128-bit WEP to enable data encryption.

Default Key

Enter the key number (1 to 4) in this field. Only one key can be enabled at any

 

one time. This key must be the same on the ZyAIR and the wireless stations to

 

communicate.

269

Chapter 23 LAN Setup