ZyAIR G-2000 Plus User’s Guide

4.6 Configuring Time Setting

To change your ZyAIR’s time and date, click the SYSTEM link under ADVANCED and then the Time Setting tab. The screen appears as shown. Use this screen to configure the ZyAIR’s time based on your local time zone.

Figure 17 Time Setting

The following table describes the labels in this screen.

Table 16 Time Setting

LABEL

DESCRIPTION

 

 

Time Protocol

Select the time service protocol that your time server sends when you turn on

 

the ZyAIR. Not all time servers support all protocols, so you may have to check

 

with your ISP/network administrator or use trial and error to find a protocol that

 

works.

 

The main difference between them is the format.

 

Daytime (RFC 867) format is day/month/year/time zone of the server.

 

Time (RFC 868) format displays a 4-byte integer giving the total number of

 

seconds since 1970/1/1 at 0:0:0.

 

The default, NTP (RFC 1305), is similar to Time (RFC 868).

 

Select None to enter the time and date manually.

 

 

Time Server Address

Enter the IP address or the URL of your time server. Check with your ISP/

 

network administrator if you are unsure of this information.

Current Time

This field displays the time of your ZyAIR.

(hh:mm:ss)

Each time you reload this page, the ZyAIR synchronizes the time with the time

 

server.

Chapter 4 System Screens

68