ZyAIR G-2000 Plus User’s Guide

23.2 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as outlined below.

•For TCP/IP Ethernet setup refer to the Internet Access Application chapter.

•For bridging Ethernet setup refer to the Bridging Setup chapter.

23.3TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your ZyAIR for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet Setup, as shown next:

Figure 127 Menu 3.2 TCP/IP Setup

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= Server

TCP/IP Setup:

Client IP Pool:

IP Address= 192.168.1.1

Starting Address= 192.168.1.33

Size of Client IP Pool= 32

IP Subnet Mask= 255.255.255.0

First DNS Server= From ISP

RIP Direction= Both

IP

Address= N/A

Version= RIP-1

Second DNS Server= From ISP

Multicast= None

IP

Address= N/A

Edit IP Alias= No

Third DNS Server= From ISP

 

IP

Address= N/A

 

DHCP

Server Address= N/A

 

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Follow the instructions in the next table on how to configure the DHCP fields.

Table 87 DHCP Ethernet Setup Fields

FIELD

DESCRIPTION

 

 

DHCP

This field enables/disables the DHCP server.

 

If set to Server, your ZyAIR will act as a DHCP server.

 

If set to None, the DHCP server will be disabled.

 

If set to Relay the ZyAIR acts as a surrogate DHCP server and relays requests and

 

responses between the remote server and the clients.

 

When set to Server, the following items need to be set:

 

 

Client IP Pools

 

 

 

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

 

 

265

Chapter 23 LAN Setup