Muratec F-65 Your Name, Abcdef, Phone TypeTone, When you see the character you want

_

Use the numeric keypad to enter your fax number. To put in a dash for easier reading, press DIALING OPTIONS once. The number may contain up to 20 char- acters (numbers and dashes).

972-555-5525_

Note: If you make a mistake, press CANCEL to erase to the left. Or, if you want to change just one character in the number, press to move the cursor to the left, or to move it to the right, to the character you want to change. Press CANCEL to erase it. Then re-enter it until the fax number is just as you want it.

6 Press ENTER to save the number.

7 The LCD now asks you to enter the name you want to appear at the top of faxes you send. The fax industry term for this name is TTI.

The LCD shows briefly:

Your Name

then it will show the character set available, such as:

_ABCDEF >

Use the numeric keypad to enter a name up to 22 characters in length.

If you need to insert a space in the name, one can be found before and after each set of characters.

To find a different set of characters, press 2 or 8 repeatedly to scroll through character sets until you see the one you want.

Getting started

For example, pressing 8 several times would show these displays:

_GHIJKL >

_MNOPQR >

_STUVWX >

_YZ. >

_abcdef >

When you see the character you want:

•Press either 4 or 6 to move the cursor to the character you want.

•Then press 5 to enter that character and move on to the next entry.

Note: If you make a mistake, just press CANCEL to erase to the left. Then continue to enter the character(s) you want.

Note: As you enter characters, the LCD will scroll to the left so you can view entries longer than five characters — for example, Sarah’s fax:

ghijkl > Sarah "#$:' > arah'

stuvwx > rah's _stuvwx > ah's

ABCDEF > h's F abcdef > 's Fa

stuvwx > s Fax

8 When the name is as you want it, press ENTER to save it and continue.

9 The LCD now indicates the type of dialing, tone or pulse, that is set for your fax machine:

Phone Type:Tone

If the setting you see is acceptable, skip to step 11.

If not, go on to step 10.

1.13