Muratec F-65 operating instructions Programming an F-code transmission, 555-0692,A,S01

Beyond the basics

Note: If you make a mistake or want to erase previously entered numbers, press CANCEL to erase to the left. Or to change just one character in the number, press to move the cursor to the left, or to move it to the right, to that character. Press CANCEL to erase it. Then re-enter until the number is just as you want it.

7 Use the numeric keypad to enter up to 120 fax numbers. These can be any combination of other one-touch keys, speed-dial numbers and numbers you enter with the numeric keypad.

Important: Do not press ENTER.

Between each number, press COM-OPTIONS,ENTER to enter a comma.

Important: Do not insert a comma after the last number.

9-555-0692,A,S01

Your display can show only 16 characters at a time. To view characters beyond those 16, press to scroll to the left or to scroll to the right.

Note: If you make a mistake or want to erase previously entered numbers, press CANCEL to erase to the left. Or to change just one character in the number, press to move the cursor to the left, or to move it to the right, to that character and press CANCEL to erase it. Then re- enter until the number is just as you want it.

8 Now, while you still can see the fax number on the LCD, press COM-OPTIONSfour times. The LCD shows:

4.Polling

9 press ENTER. The LCD shows:

Polling

10 If you want the polling to begin immediately every time you press the key, press ENTER and skip to step 13.

If you want to delay the polling, press COM-OPTIONS,COM-OPTIONS,ENTER.

11 Instructways: your fax to carry out this delayed command in one of the following

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 (i. e., 00), and then the time when the fax could perform the command:

Time: 00/17:05

12 Press ENTER, ENTER.

13 The LCD now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press STOP to return your machine to standby mode.

If you do want to enter or change another key’s programming, go back to step 4.

Programming an F-code transmission

Note: To erase a programmable one-touch key, refer to page 2.36.

Note: For F-code transmission to occur, three things must be true:

•The remote fax machine must support ITU-Tsubaddress (and password) capabilities.

•A mailbox(F-code box) with an ITU-Tsubaddress must exist on the remote fax. (It does not have to have a ITU-Tpassword.) If the other machine does- n’t have at least one box with a subaddress, F-code communication will be impossible.

•You must know the ITU-Tsubaddress and (if applicable) password informa- tion for the mailbox (F-code box) on the remote machine.

To program an F-code transmission into a programmable one-touch key:

1 Press PROGRAM, C, 1. The LCD shows:

Enter P OneTouch

2.32