Muratec F-65 EasyStart, Clearing settings before beginning, What do you want to do?

To change only one digit, press to move the cursor to the left, or to move it to the right, to the digit you want to change. Then enter the correct digit.

4 Press ENTER to save the clock setting and continue EasyStart.

5 The LCD now asks you to enter your fax number as you want it to appear on other fax machines’ displays or printouts. The fax industry term for this num- ber is Subscriber ID.

The LCD shows briefly:

Your Fax Number

then it will show:

Getting started

EasyStart

EasyStart is already installed on your fax machine. Use it to guide you in entering the bare-bones settings required for normal operation. If necessary, you can always make changes to these settings later.

Important: Before beginning EasyStart, be sure you have correctly installed your machine and loaded paper into it (see “Setting up,” beginning on page 1.6).

Clearing settings before beginning

Before using EasyStart, clear your machine’s built-in user data memory, which stores settings. This ensures the memory will hold only your settings.

Important: After you use EasyStart, please do not clear the memory again unless an authorized technician asks you to do so.

To clear the machine’s memory:

1 Press PROGRAM, *, 2, ENTER. The LCD now asks whether you are sure about clearing the memory:

Check Prog/Enter

Note: If you don’t want to proceed, just press PROGRAM or STOP.

2 If you are sure, press ENTER to clear the memory.

What do you want to do?

Please determine the following before you proceed:

1 The type of dialing your telephone system requires — Select either tone or pulse (rotary) dialing.

2 The name and fax number you want to appear on your faxes — Every fax page you send will arrive at the receiving machine with a single line of text at the very top of the page, and will include a name and a fax number. This name cannot be longer than 22 characters.

Note: The fax industry term for this text is Transmit Terminal Identifier

(TTI).

Using EasyStart to enter initial settings

Important: If you press STOP during EasyStart, your fax machine will return to standby mode (its normal condition) but will retain the settings you saved by pressing ENTER as described in these instructions.

1 Press PROGRAM, I.

User Install

2 Press ENTER.

The LCD displays the current setting of the fax’s built-in calendar/clock, with a blinking cursor appearing over the first digit.

’99 01/01 00:00

Note: Throughout these instructions, we will show the cursor as an under- line. However, it really appears on the LCD as a blinking box over the character.

3 Use the numeric keypad to enter the correct date and time, using a YYMMDD format for the date and 24-hour(“military”) format for the time.

For example, to set 8:30 PM on September 11, 1999, press 9 9 0 9 1 1 2 0 3 0, which results in the following:

’99 09/11 20:30 (Year, Day/Month, Time)

Note: Your fax machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

1.12