Philips SC367 warranty Monitoring baby’s sounds, Talking back to your baby, Two-way intercom

HOW TO USE THE BABY MONITOR

Monitoring baby’s sounds

To use the units to listen to your baby:

•Position the Baby unit at least 1 metre away from the baby so that the microphone (1-1) can pick up baby’s sounds.

•Set the channel switch to the same position on both units.

•Set the mode switch on the baby unit (1-8) to MONITOR.

•The green TRANSMIT light (1-3) lights when a sound is picked up.

•Move away from the Baby unit with the Parent unit.

•Switch on the Parent unit using the Volume control/Off (2-5) and adjust the volume to the level you prefer.

The green LINK light (2-3) lights continuously when the Parent unit and the Baby unit are in touch with each other.

Talking back to your baby

Use the talk-back facility on the Parent unit to comfort your baby:

•Set the mode switch on the baby unit (1-8) to MONITOR.

•Use the VOLUME control (1-6) of the Baby unit to set the loudspeaker level to about mid-range.

•Switch on the Parent unit using the Volume control/Off (2-5).

•Press and hold the TALK pushbutton (2-9) on the Parent unit and talk clearly into the microphone (2-1).

•Release the TALK pushbutton when you are finished.

Adjust the volume of the Baby unit loudspeaker to the level you prefer using the VOLUME control (1-6) on the Baby unit.

Note: While the TALK pushbutton on the Parent unit is being pressed, sounds from the Baby unit cannot be heard on the loudspeaker of the Parent unit.

Two-way intercom

To use the units as a two-way intercom:

•Set the mode switch on the baby unit (1-8) to INTERCOM.

•Use the VOLUME control (1-6) of the Baby unit to set the loudspeaker level to about mid-range.

•Switch on the Parent unit using the Volume control/Off (2-5) and adjust it to about mid-range.

•On the Parent unit, press and hold the TALK pushbutton (2-9) and talk clearly into the microphone (2-1). Release the button when you are finished.

•On the Baby unit, press and hold the TALK pushbutton (1-4) and talk clearly into the microphone (1-1). Release the TALK pushbutton when you are finished.

Note: While the TALK pushbutton on either unit is being pressed, a signal from the other unit cannot be heard. In other words, only one person should speak at a time.

4