Philips SC367 warranty Problem Solving, Problem Possible Cause Solution, Parent unit, Baby unit

PROBLEM SOLVING

Problem	Possible Cause	Solution
Power light does not light.	Parent unit
	Unit is not turned on.	Turn Volume control/Off switch
		clockwise (2-5).
	Batteries are low.	Recharge batteries.
	Baby unit
	Unit is not turned on.	Set microphone switch (1-8) to
		the MONITOR position.
	AC adapter is not plugged in or	Plug in AC adapter or replace
	Batteries are exhausted.	batteries.
	AC adapter plugged into an	If the power socket has a switch,
	outlet that is not working.	turn it on.
High pitched noise.	Units are too close together.	Move Parent unit away from
		Baby unit.
	Volume too high.	Turn volume control on Parent
		unit counter-clockwise.
Parent unit batteries do not	Battery life is at an end.	Replace rechargeable batteries,
charge.		using only 1.2V, AA NiMH
		batteries.
No sound.	Volume control on Parent unit is	Turn volume control/Off switch
	set too low.	clockwise (2-5).
	Units are out of range.	Move Parent unit closer to Baby
		unit.
Power light blinking.	Batteries are low or empty.	Parent unit:- recharge batteries.
		Baby unit:- replace batteries or
		connect to mains power.
Talk-back / intercom	Loudspeaker volume on Baby	Set volume control (1-6) on Baby
function not working*.	unit is too low.	unit to mid-range.
Interference or poor	Mobile or cordless phones too	Move the phones away from the
reception.	close to the baby monitor can	units.
	cause interference.

*With the talk / intercom function if either the Parent or Baby unit is transmitting, then the other unit can only receive and not transmit.

6