STE 58761
CHAPTER 4
AUXILIARY SIGNALS
(1)Function
Manages auxiliary signals used to control the hand, the air control axes, etc.
(2)Input format
None
(3)Comments
The output signal port and solenoid type corresponding to each function key must be defined (specified) in the system configuration file. For more information, see the
Press the "Esc" key to exit the Auxiliary Signal Operation Mode and return back to the original menu.
While under emergency stop or in feed hold, auxiliary signals may be turned on and off.
The initial state including signals which is set for double solenoids in the power ON state is turned off.
－