3XVKWKHGULYHUMXVWHQRXJKWRNHHSWKHELWILWWLQJ the head of the screw.
CAUTION: Over tightening can result in the screw breaking or damage to the end of the driver bit.
1.Applying this power tool for too long, shall tight- en the screw excessively and break it.
2.If the machine is held at an angle to the screw being tightened, the head of the screw may be damaged, or the specified torque may not be transmitted to the screw. Always keep the unit and the screw being tightened in a straight line.
FORWARD / REVERSE SWITCH
7KHELWURWDWHVFORFNZLVH YLHZHGIURPWKHUHDUE\
SXVKLQJWKH5VLGHRIWKHSXVKEXWWRQ7KH/VLGH of the push button is pushed to turn the bit coun- WHUFORFNZLVH Fig. 5
CAUTION: The push button can not be switched while the drill is turning. To switch the push button, stop the machine and then set the push button.
Push button
Figure 5
TORQUE ADJUSTMENT
By rotating the torque control collar behind the FKXFN\RXFDQDGMXVWWKHWRUTXHWRHDFKRIWKH VHWWLQJV Fig. 6
The range of
Torque control
Figure 6
IX - Maintenance
CLEANING
ƒ:LWKWKHPRWRUUXQQLQJEORZGLUWDQGGXVWRXW of all air vents with dry air at least once a week. Wear safety glasses while performing this. ƒ([WHULRU SODVWLF SDUWV PD\ EH FOHDQHG ZLWK D
damp cloth and mild detergent.
CAUTION: Although exterior plastic SDUWVDUHKLJKO\VROYHQWUHVLVWDQW1(9(5XVH solvents.
Charger Cleaning Instructions
ƒ'LUWDQGJUHDVHPD\EHUHPRYHGIURPWKHH[WH- rior of the charger using a cloth or soft
CAUTION: Disconnect the charger from the AC outlet before cleaning.
WARNING: To assure product safety
DQGUHOLDELOLW\UHSDLUVPDLQWHQDQFHDQGDGMXVW- PHQW LQFOXGLQJEUXVKLQVSHFWLRQDQGUHSODFH- PHQW VKRXOGEHSHUIRUPHGE\FHUWLILHGVHUYLFH centres or other qualified service organisa- tions, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available at extra cost from your local SPARKY service centre.
EN 8
BAR 12E
17.3.2006 . 09:11:21