Maintain the print cartridge
If the paper is jammed in the paper feed area
1.Remove the jammed paper as shown.
If the paper tears when it is being removed check to ensure that no small pieces have been left inside the machine.
2. Reload new paper with the print side facing toward you.
3. Press Cancel when finished.
4. If this was a fax, reprint the fax. For more information, see Reprinting faxes on page 52.
Maintain the print cartridge
To maintain good printing quality, we recommend you occasionally maintain the print cartridge and its associated parts:
Clean the print cartridge nozzles
If characters are not printing completely or white streaks appear in your text, you may have clogged nozzles. Clean the print cartridge as described below:
1.Press Menu repeatedly until TOOLS appears and press Start/Enter.
2.Scroll to Clean Cartridge by pressing !" and press Start/Enter.
3.Examine the printed test pattern.
•If print quality does not improve, reinstall the cartridge and repeat these steps.
•If the line is still broken, wipe the nozzles and contacts. For more information, see Wipe the print nozzles and contacts on page 59.
Wipe the print nozzles and contacts
If cleaning the print cartridge nozzles as discussed above does not help and you are certain the cartridge has plenty of ink, the problem may be caused by dried ink on the print cartridge nozzles and contacts or the print cartridge carrier contacts. Follow these two sets of instructions for manual cleaning.
Clean the nozzles
1.Press Access Cartridge.
2.Open the control panel and cartridge compartment cover and remove the cartridge. See Replace the print cartridge on page 56.
3.Gently blot and wipe the contacts and nozzles dry.
• Use a clean cloth dampened with water to gently clean the entire
•To dissolve any dried ink, hold the damp cloth against the nozzles for about three seconds.
Care and maintenance 59