HP 1050 manual Answer/receive mode, Set up distinctive ring Drpd answer mode, HP1040 Fax

Page 37

Answer/receive mode

DRPD OK will display when the pattern has been learned and the HP Fax will return to Ready mode.

Step 2—Set up distinctive ring (DRPD) answer mode

Once you have activated distinctive ring, it becomes one of the answering modes you can select by pressing the Ans.Mode/Contrast or Rcv.Mode/Contrast button.

!Press Ans.Mode/Contrast or Rcv.Mode/Contrast repeatedly until DRPD Mode appears in the display.

In Ready mode, DR appears in the right hand corner of the display.

Now, the HP Fax will manage calls and faxes as if it were set to AUTO mode (see AUTO mode on page 32.)

TIP: Distinctive ring must be set up again if you reassign your fax number or connect the machine to another telephone line. Once set up again (that is, the fax machine has learned the ring pattern and the answering mode is correctly set), you should test the fax machine by calling the fax number and another number on the same line. The machine should respond appropriately to a call placed to the fax number with fax tones, and to a normal telephone call with the expected ring pattern.

Answer/receive mode

How the product receives faxes depends on the answer/receive mode you chose when you set up the product. You can send faxes in any answer/receive mode. The answer/ receive mode setting determines how the device answers the incoming call and varies between the models.

HP1040 Fax

How are you going to use your HP Fax?

Read about...

 

 

Fax machine with few or no voice calls.

FAX mode

 

 

Telephone and fax machine without an

AUTO mode

external answering machine connected.

 

 

 

As a fax machine with an external

TAM mode

answering machine.

 

 

 

Using Distinctive Ring (DRPD) service to

See Distinctive ring (DRPD) on

set up a separate telephone number for

page 30.

your fax on the same physical line as

 

your other numbers.

 

 

 

Telephone with few or no fax calls.

TEL mode

 

 

Additional features 31

Image 37
Contents HP 1040/1050 Fax series Page Contents Digital message center HP 1050 Fax only Additional featuresAdvanced faxing Care and maintenance Feature referenceSpecifications and regulatory information Declaration of conformity Load paper Quick startSend a fax Load documents to fax or copyMake a copy Receive a faxPrint Order then Normal will display Make a telephone callHP Fax basics Parts of the HP Fax HP Fax 1040/1050Bottom view Control Panel of HP FAX5Control panel of HP 1050 Fax Fax Mute/Search 20 Rcv. Mode/Contrast Menus Basic FAX menu Overview of menu optionsECM Mode ResolutionAdvanced FAX menu Fax LogSET UP TAM menu SET UP Sound menuTools menu Speakerphone-HP 1050 Fax Loudspeaker-HP 1040 FaxNavigate the menus Ready modeMenu buttons Most text fields Enter dates, times, text, and telephone numbers## , $$ , %% Fax header telephone numberEnter dates, times, text, and telephone numbers Store a number in the phone book Speed dialingDial from the phone book Print the phone bookDocument types and sizes Paper types and sizesSet document resolution and contrast for a single copy Ringer volume Adjust volumeSpeaker volume Receiving via an extension telephone HP 1040 Fax only Automatic fax redialSet rings to answer Additional featuresBlock junk fax numbers Use Caller IDImage TCR Scan & Fax ModeDelete a number Teach the HP Fax the ring pattern Distinctive ring DrpdSet up distinctive ring Drpd answer mode Answer/receive modeHP1040 Fax FAX HP1050 FaxSet up a separate telephone number for Machine returns to Ready mode Turn on the message center Digital message center HP 1050 Fax onlyPlay your greeting Record your greetingAnnouncement only Screen or monitor your callsPlay back messages Erase selected messages Erase messagesErase all messages in memory Remote Password Remote AccessAccess the message center Toll Saver Message paging Set up message pagingRecord a conversation Receive a messagePage Broadcasting Advanced faxingDelayed fax Polling Setting send pollingPolling another fax to receive To cancel the scheduled jobStart Date&Time will display Forward faxesForward faxes Advanced faxing Set the date and time Alarm soundsTurn on and off sounds Set the fax header information Silent modeKey sounds Automatic reports Print reportsReports you can print System Data Reprinting faxesJunk Fax TAM StatusFax Header Clearing memoryDial/Schedule Faxes in MemoryRedial a number in memory View ink level Print cartridge informationReplace the print cartridge Print the self testReplace the print cartridge Document jams during transmission Clear jammed documents and paperPaper jams during printing Maintain the print cartridge Clean the print cartridge nozzlesWipe the print nozzles and contacts Clean the cartridge carrier contacts Clean the document scanner area Clean the document scanner area LCD error messages Adjust the scannerJunk Fax Full Junk Fax EmptyLoad Document Memory FullPolling Error Poll Code ErrorPoll job exists AlreadyFax problems TroubleshootingFine Paper feeding problems Print quality problemsIf Ink Low. Install new ink cartridge is displayed Digital Message Center problems Troubleshooting Care and maintenance Acceptable documents Specifications and regulatory informationPrint cartridge Product specificationsYES Sample of ITU #1 test chart reduced to 60.5% Environmental product stewardship program Regulatory notices Regulatory notices Declaration of conformity Declaration of conformityBefore calling customer support Use Hewlett-Packard support servicesTampered with Hewlett-Packard Limited Warranty StatementHewlett-Packard Limited Warranty Statement Page Index Page Page Page
Related manuals
Manual 54 pages 54.74 Kb