Balcar R410A 121, RAV-SM561, 801CT-E RAV-SM1101, 1401CT-E, Part name ’ty Shape Usage

RAV-SM561, 801CT-E

RAV-SM1101, 1401CT-E

Accessory parts and Parts to be procured locally

rAccessory parts

Part name	Q’ty	Shape	Usage
Owner’s Manual	1	—	—
Installation Manual	1	This manual	—
Installation pattern	1	—	Drawing-out port of
			hanging bolt pipe
Thermal insulation	2		For thermal insulation of
pipe			pipe connecting section
Washer	4	M10 × Ø25	For holding down unit
Hose band	2		For connecting drain
			pipe

<Separate sold parts>

Part name	Q’ty	Shape	Usage
Standard wired	1		Model
remote controller			RBC-AMT21E

Part name	Q’ty	Shape	Usage
Drain hose	1		For connecting drain pipe
Bushing	1		For protection of edge at
			power taking-in port
Thermal insulator	1		For thermal insulation of drain
			hose (10t × 200 × 200)
Thermal insulator	1		For upper pipe hole of indoor
of top plate			unit (6t × 130 × 160)
Banding band	2		For prevention of open of
			drain hose thermal insulator

rParts to be procured locally

Connecting pipe (Liquid side)

(6.4mm (diam.), Nominal (diam.) 1/4” thick 0.8mm) RAV-SM561CT-E

(9.52mm (diam.), Nominal (diam.) 3/8” thick 0.8mm) RAV-SM801CT-E, RAV-SM1101CT-E, RAV-SM1401CT-E

Connecting pipe (Gas side)

(12.7mm (diam.), Nominal (diam.) 1/2” thick 0.8mm) RAV-SM561CT-E

(15.9mm (diam.), Nominal (diam.) 5/8” thick 1.0mm) RAV-SM801CT-E, RAV-SM1101CT-E, RAV-SM1401CT-E

Power supply cord

2.5mm² (H07RN-F or 245IEC66) (20m or less) 3.5mm² (AWG-12) (50m or less)

Connecting cable (indoor and outdoor cable) H07RN-F or 245IEC66 (1.5mm² or more)

Thermal insulation for refrigerant pipe

(10mm or more, thermal insulating foam polyethylene)

Thermal insulation for drain pipe (10mm or more, foam polyethylene)

Drain pipe (Outer 26mm (diam.)) (VP20)

Tapes

– 121 –