Balcar R410A service manual 147

6. Set error

If flashing ERROR is displayed when the program operation has been set up, correct the

time following the procedure below.

1. When flashing ERROR is displayed, ON time of the failed program flashes.

7. How to copy the program operation time

When setting the program operation, already set program can be copied and set to the other day of the week.

<Example: To copy the operation contents of Monday to Tuesday>

	SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2	ERROR
PROGRAM3

2.	Push	SET	button to flash the time to be corrected.
3.	Using HH / MM buttons, correct ON/OFF time.
4.	Push	SET	button. When the setup is correctly performed, ERROR display disappears.
5.	The correction has completed by pushing PROGRAM button.

1.	Push	CHECK	button in normal display.
2.	Push	DAY	button and put the operation reserve
	indication		on the day of the week of which the

program operation is already set. (Monday in the example)

3.Push PROGRAM button.

Present day of the week indication and Operation reserve indication flash.

4. Push	DAY	button and put the present day of the
week indication on the day of the week to be copied.
(Tuesday in the example) (For continuous copying,
push	SET	button, and then push DAY button.)

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3

WEEKLY TIMER

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

–

CAUTION

• When ON/OFF time is set as follows, ERROR is displayed.
1) When a part of the operation time makes inroads into a part of another operation time
Example:	ON time	OFF time	0:00					23:59
				ON		OFF
					ON		OFF

5.Push PROGRAM button. The operation reserve indication goes on under the copied day of the week.

8.How to check the program operation time

1 Push CHECK button.

147 –

2)	When OFF time is ahead of ON time
	Example:	ON time	OFF time	0:00				23:59
3)	When ON time is same as OFF time				OFF		ON
				0:00				23:59
	Example:	ON time	OFF time
					ON OFF
4)	ON time or OFF time is singly set up			0:00				23:59
	Example:	ON time	OFF time
			[Is not set]		ON	OFF

•The following cases are not set error.

1)OFF time of the previous cycle is same as ON time of the next cycle.

Example:	ON time	OFF time	0:00					23:59
			ON		OFF
2) When the next cycle is set to the time before the				ON		OFF
set time of the previous cycle
Example:		ON time OFF time	0:00					23:59
ON time	OFF time				ON		OFF
			ON		OFF
Pushing the PROGRAM button changes the order in order of time.
3) When both ON and OFF times are same			Continuous operation
Example:	ON time	OFF time
			for 24 hours

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3	2
WEEKLY TIMER

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

1,

3

CAUTION

1.While reserve indication is flashing, the display does not change even if other buttons are

pushed than DAY , CHECK , and

PROGRAM button.

2.If 30 seconds have passed while the reserve indication is flashing

without pushing DAY , CHECK or PROGRAM button, the display returns automatically to the original display. (Normal display)

<Example: Case to check the program operation time of Wednesday in Monday>

•The operation reserve indication flashes in the normal display status.

	SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2	ERROR
PROGRAM3

2 Push DAY button and put the operation

reserve indication	on the day of the week
to be checked.
• Every pushing DAY	button, the operation
reserve indication	flashes and the contents

of program operation time of the day of the week on which the operation reserve indication has been put on is displayed.

	SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2	ERROR
PROGRAM3

3 Push CHECK button.

• It turns to be normal indication.

RBC-EXW21E