ENGLISH
7
PRESET FUNCTIONS AND OPERATIONS
(1)List of Preset Functions
•Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off.
•The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback.
•One of the preset functions can be used to display information on this set (microprocessor version).
Preset function type |
| Character display |
| |
Description | (as set upon shipment | No. | ||
|
| from factory) |
| |
|
|
|
| |
Preset type | Selection of preset type. | Preset Type 1 | 1 | |
|
|
|
| |
Finish mode | Setting of operation when playback ends. | Finish Next | 2 | |
|
|
|
| |
Power on mode | Setting of operation when power is turned on. | Power On Stby | 3 | |
|
|
|
| |
Auto cue | Setting of whether or not to perform the auto cue operation and the | CueDet. | 4 | |
audio startup level. | ||||
|
|
| ||
|
|
|
| |
Auto stop | Setting of whether or not to automatically stop the servo functions. | Sleep ON | 5 | |
|
|
|
| |
Program 1 | Setting of whether or not to play program 1. | Program 1 OFF | 6 | |
|
|
|
| |
Program 2 | Setting of whether or not to play program 2. | Program 2 OFF | 7 | |
|
|
|
| |
Program 3 | Setting of whether or not to play program 3. | Program 3 OFF | 8 | |
|
|
|
| |
Digital output | Selection of whether or not to output subcodes. | Subcode OFF | 9 | |
|
|
|
| |
End monitor | Setting of whether or not to use the end monitor function and monitor | End Mon. 10 s | 10 | |
time setting. | ||||
|
|
| ||
|
|
|
| |
E.O.M. | Setting of whether or not to display the EOM and display time setting. | E.O.M. 10 s | 11 | |
|
|
|
| |
Next track standby | Setting of whether or not to standby at the next track when the CUE | Next Stb. OFF | 12 | |
button is pressed during playback. | ||||
|
|
| ||
|
|
|
| |
Next Track Reserve | Setting of operation when select knob is turned during playback. | Reserve. OFF | 13 | |
|
|
|
| |
Fade in time | Fade in time setting. | FadeIn OFF | 14 | |
|
|
|
| |
Play speed | Standard playing speed setting. | Normal Speed | 15 | |
|
|
|
| |
Delay start | Delay start time setting. | Delay OFF | 16 | |
|
|
|
| |
Play lock | Selection of whether or not to inhibit the panel switches during playback. | Play Lock OFF | 17 | |
|
|
|
| |
Frame display | Selection of whether or not to display frames. | FR Disp ON | 18 | |
|
|
|
| |
CDR disc | Selection of whether or not to test play CDR discs which do not include a | Normal Disc | 19 | |
TOC. | ||||
|
|
| ||
|
|
|
| |
Parallel remote | Selection of whether or not to accept parallel remote signals. | Remote ENA | 20 | |
|
|
|
| |
Parallel remote | Selection of whether or not to output standby tally. | ST. Tally ON | 21 | |
|
|
|
| |
Parallel remote | External control tally output signal setting. | INDEX 2 Tally | 22 | |
|
|
|
| |
Parallel remote | Fader start mode selection. | Fader Pause | 23 | |
|
|
|
| |
Stereo/Mono | Selection of stereo or monaural playback. | Stereo | 24 | |
|
|
|
| |
Preset clear | Setting for clearing presets and setting them to the initial values. | Ini. Preset | 25 | |
|
|
|
| |
Set information | Microprocessor version display. | Ver. **** (* = number) | 26 | |
|
|
|
|
When presettings are made, the time display set with the TIME button and the play mode set with the PLAY MODE button at that time are stored in the memory. These modes will be set when the power is next turned on.
NOTE:
For CDR discs without TOCs, there are no pits (signals) at the disc’s lead in and lead out sections, so errors may occur, particularly when searching for tracks. If an error should occur, open the disc holder, then close it and perform the operation again.
20