ENGLISH
CD PLAYER
qPower operation switch (ON/STANDBY)
When the switch is pressed, the standby mode is set and “OFF” appears on the display. When pressed again, the power turns off. (This operation is not performed when the receiver system power operation switch is off.)
wOPEN/CLOSE button (5)
Press this to open and close the disc tray. When pressed once, the disc tray opens out, and when pressed again, the disc tray closes. If a disc is loaded, the total number of tracks and total playing time of the disc are displayed several seconds after the disc tray is closed.
eDisc tray
Load discs here.
r 1 (play) button |
Press this button to start playing the disc. |
Even when the disc tray is open, the disc tray |
closes and playback begins when this button is |
y2 (stop) button
Press this button to stop playback.
uDisplay
i8/6 (automatic/manual search reverse) button
Use this to move to the beginning of a specific track.
When pressed during playback or in the pause mode, the pickup moves backward a number of tracks equal to the number of times the button is pressed.
o 7/9 (automatic/manual search |
forward) button |
Use this to move to the beginning of a specific |
track. |
When pressed during playback or in the pause |
mode, the pickup moves forward a number of |
tracks equal to the number of times the button |
is pressed. |
• The automatic search mode is set if the i or |
CD PLAYER DISPLAY
The following is displayed on the track number display:
•When the disc’s data cannot be read properly…………………………………………………………… 
•In the stop mode ………………………………………………………………………Total number of tracks
•In the play and program modes …………………………………………………………………Track number The following is displayed on the time display:
•When the disc’s data cannot be read ………………………………………………………… 
•In the stop mode ……………………………………………………………………………Total playing time
•In the play and pause modes …………………………………………………Elapsed time for current track
•In the program mode……………………………………………………Elapsed time of programmed tracks
• When the outermost section of the disc is reached during the manual search operation ………
Track number display |
| Time display |
|
|
|
This lights when the RANDOM button is pressed.
RANDOM TRACK No. | SCAN REMAIN TIME REPEAT |
| INDX |
| ONE |
| ALL |
| A B |
pressed. |
t3 (pause) button
Press this button to stop playback temporarily. Press the play button (1) to cancel the pause mode and resume playback.
o button is released within 0.5 seconds, and |
the manual search mode is set if the button is |
held for over 0.5 seconds. |
1(the play indicator) lights when a disc is playing, and 3 (the pause indicator) lights when the pause mode is set.
PROGRAM | 1 2 | 3 4 | 5 6 | 7 8 | 9 10 | 11 12 | 13 14 15 16 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
”PROGRAM“ lights during programmed
playback.
This lights if there are more than 17 tracks on the disc.
Music calendar
The numbers of the tracks on the disc are displayed here (up to track number 16). The number for the corresponding track turns off after that track is played.
During programmed playback, the numbers of the programmed tracks are displayed (up to track number 16).
All the numbers light if the disc’s data cannot be read properly.
This changes as follows each time the REPEAT button is pressed:
1st press | : REPEAT | ONE | ||
| calendar lights. |
| ||
2nd press | : REPEAT |
| ||
ALL | ||||
3rd press | : REPEAT |
|
| is displayed. |
A / | ||||
4th press | : REPEAT |
|
| is displayed. |
A / B | ||||
5th press | : Nothing is displayed. | |||
(Only REPEAT ONE and REPEAT ALL are displayed in the stop mode.)
8